NEAT: ERAmega

Annunciator alarm panel
Simple, effective, and flexible

Highlights:
16 channels
Full configurable. NO/NC, cable monitoring, delay, output relay
Auto brightness control

Applications:

Could be installed in a yacht, ship, factory, or any other place where an audible and visual alarm from critical devices needed.

Monitoring:

This device can monitor engine water temperature/pressure/flow low or high, lub oil temperature/pressure low/high, fuel oil temperature/pressure low or high, filter differential pressure, fuel oil level, engine overspeed/underspeed, crank oil mist high, pump change over, bilge level, pump start or stop, reverse current, overcurrent, contactor on or off, battery control, open hatch, fire and more. (sensors, and sensor translators, not included).

Compatible sensors:

Device can accept any on/off contact or open collector sensor, both NO and NC, like thermostat, pressostat, differential pressostat, relay contact, auxiliary contact, proximity switch, limit switch, level switch, flow switch, klixon and so on.

Features:

16 channels with LED indication.
General alarm, fault, and power indication.
Support both normally open (N.O.) and normally closed (N.C.) input contacts.
Support open collector input.
Support both Cable monitoring or not.
Programmable delay individual for every input, 0-8min (useful for contact bounce, bilge alarm, etc).
Built-in buzzer.
Remote siren relay output.
Three built-in easy programmable relays (useful for emergency engine shut down, remote monitoring, etc).
Automatic brightness control (useful for light fluctuated enviroment, like ship's bridge).
9 TTL digital programmable by manufacturer I/Os.
Wide power supply voltage 8-35V.
Easy setup on-site, without need of computer or DIP switches.
Unit can be delivered preconfigured according customer demands.
Support both local and remote, Test and Cancel functions.
Weak current inputs (<5V, <2mA), designed for sparkless operation in hazardous areas.
Modern microcontroller technology.
Laser cut and engrave front panel.
Setup table for easy setup.
Versatile description table. Can be filled by hand or printer. Content can be text diagram or both.
1 year warranty (see terms)
Full spare parts availability, and support for installation and use.
Dimensions: (L x W x H) 9,5cm x 18,5cm x 13,5cm. Weight: <1kg